Product Specification
Brand Name: DUTRIEUX
Origin: Mainland China
High-concerned Chemical: None
Types:
- Shaver sterilizer
- Toothbrush sterilization portable
- Toothbrush holder, home uv sterilizer
- Toothbrush sanitizer holder
- Uv toothbrush sanitizer
- Toothbrush sterilization, Uv toothbrush
- Toothbrush uv, toothbrush sterilizer
- Toothbrush sterilization rechargeable, Toothpaste
- Toothbrush sterilizer, Toothbrush sterilization cradle
- Toothbrush and toothbrush holder, drying for teeth
- Wall shelf, Portable toothbrush sterilizer
- Holder tooth brush, household uv sterilizer
- Toothbrush sterilizer portable
Product Function Introduction:
1. UV sterilization: This product uses Philips deep ultraviolet chip for sterilization, UVA ultraviolet bacteriostasis, and the sterilization rate is up to 99.999%.
2. Product instructions:
- Power on: press and hold the key on the front of the product for more than 3 seconds to turn it on or off.
- Turn on the UV lamp: click the on button once to turn off or turn on the UV lamp
- Work flow: click the start button once when disinfecting each time. After 3 minutes of disinfection each time, it will automatically enter the circulating disinfection mode. At the same time, the screen will be black and the light will go out to enter the power-saving mode. Under the circulating disinfection state, it will automatically disinfect every 6 hours.
- Drying function: It is necessary to connect the power supply to turn on the thermostatic drying function. After connecting the power supply, the electric heating rod inside the product will automatically heat to the thermostatic state.
Product Power Status Reminder:
1. When the machine power is lower than 20%, the screen charging flashes.
2. When the machine is charging, the screen charging icon lights up.
3. After the machine is fully charged, the screen charging completion icon will light up. The machine is equipped with a Type-c data line, which can be charged with a mobile phone head or a charging bank, and the charging time is about 4-6 hours.
Daily Cleaning of Products:
1. The toothbrush position of the machine can be disassembled and washed, which is simple and convenient to install and disassemble.
2. There are precision circuits and lithium batteries inside the machine. It is strictly forbidden to wash the whole machine.
Product Parameters:
- Product name: Intelligent toothbrush disinfection rack
- Sterilization method: UV+drying
- Rated power: 3W
- Input current: 1000mA
- Battery capacity: 2200mAh
- Charging time: 5 hours
- Sterilization wavelength: 200~280nm
- Installation method: no punching
- Storage space: razor * 1/toothbrush * 2
Matters Needing Attention:
1. The wall shall be dry, dust-free, and smooth. It is suitable for pasting on smooth surfaces such as ceramic tiles, marble, and glass, but not on non-smooth surfaces such as cement walls and painted walls.
2. After installing the hole-free sticker, please squeeze out the excess air inside, and then install the product body after standing for 24 hours.
3. Please use this product within the load-bearing range. Do not hang overweight articles.
4. The battery should be waterproof to avoid violent impact. Please pay attention to recycling and environmental protection.
5. Package: English instructions+toothbrush holder+Type-c data cable+stickers without punching.
